Two piercings, one alignment
Both channels must follow the same straight path so the bar sits without twisting either hole. Marking and angle are especially important.
Professional Industrial Piercing · Addison, Illinois
Industrial Piercings Built on Precise Alignment
A traditional industrial connects two upper-ear cartilage piercings with one bar. Rising Phoenix plans both angles together, checks clearance carefully, and selects jewelry around your anatomy and healing needs.
← Explore all ear piercings
Since 1998Serving Addison
Two-Point CheckAlignment matters
Sterile NeedlesProfessional procedure
Walk-InsFirst come, first served
The Placement
What is an industrial piercing?
A traditional industrial uses one straight barbell to connect two cartilage piercings, usually across the upper ear. Because the jewelry passes through both channels, the placement must be planned as one system.
Your piercer evaluates ridge depth, the path between the two points, clearance above the flat cartilage, ear shape, nearby piercings, and anything that regularly presses against the area.
When anatomy supports it, the result can be a clean classic bar or a more decorative focal point spanning the ear.
Good to Know
An industrial is one of the most anatomy-dependent ear piercings.
An ear may have enough cartilage for two separate piercings but not the matching angles or clearance needed for one connecting bar.
If a traditional industrial is unsuitable, your piercer can discuss separate cartilage placements or other anatomy-appropriate alternatives.
Reserve an anatomy checkAnatomy & Jewelry
Both holes have to work together.
Successful placement depends on matching angles, safe clearance, a stable jewelry fit, and realistic pressure management.
Anatomy must support the bar
The outer ridges need enough depth, and the flat of the ear must leave clearance beneath the jewelry. Not every ear can safely wear a traditional industrial.
Initial jewelry matters
A single properly fitted straight barbell keeps the two channels aligned while healing. Length, gauge, material, and ends are selected for your anatomy.
Pressure changes everything
Sleeping, headphones, helmets, glasses, hair, and snagging can irritate both ends. Your routine is part of the placement discussion.
Your Appointment
What to expect.
Review your routine
We discuss the look, current jewelry, sleep habits, headphones, glasses, helmets, hair, work gear, and healing history.
Assess & align
Your piercer checks both ridges and bar clearance, then marks and verifies the shared path from several angles.
Select the bar
We choose an appropriately fitted straight barbell with room for normal early swelling.
Pierce & explain care
Both channels are created with sterile, single-use equipment, followed by personalized aftercare guidance.
Industrial Piercing Gallery
Classic bars and decorative styling.
Explore industrial barbells in different finishes, end styles, and coordinated ear arrangements.
Piercing references showing different industrial jewelry and ear arrangements. Final placement and initial jewelry depend on anatomy.
Healing & Aftercare
Protect both ends of the piercing.
An industrial has two cartilage channels connected by one bar. Irritation at either end can affect the entire placement, and the surface may appear calm before the channels are mature.
- Wash your hands before touching the area.
- Use sterile saline wound wash according to your piercer’s instructions.
- Do not twist, rotate, or unnecessarily remove the bar.
- Avoid sleeping directly on the pierced ear.
- Keep phones, headphones, glasses, hats, pillowcases, and hair clean and away from the jewelry.
- Avoid pools, lakes, hot tubs, and unnecessary submersion during early healing.
- Return for jewelry and alignment checks when recommended.
When to Check In
Watch both channels and the space beneath the bar.
Contact Rising Phoenix if an end feels tight, irritation persists, the angle appears to change, or the bar begins pressing into the flat of the ear. Do not replace the bar with separate jewelry without professional guidance.
Seek prompt medical care for severe pain, rapidly spreading redness, fever, red streaking, or other worsening symptoms. This page is educational and does not replace medical advice.
Read Complete Piercing AftercareBefore You Visit
Prepare for your industrial piercing.
- Bring valid, unexpired government-issued photo identification.
- Call ahead about current age and documentation requirements for eligible minors.
- Eat beforehand and arrive hydrated, rested, and sober.
- Bring glasses, headphones, helmets, hearing devices, or work gear that sits near the upper ear.
- Bring industrial-jewelry references that show the look you prefer.
- Tell the piercer about relevant allergies, medications, skin issues, or past cartilage-healing problems.
Frequently Asked Questions
Industrial piercing FAQ
Can everyone get an industrial piercing?
No. Both cartilage ridges must support the entry and exit angles, and the bar must clear the flat of the ear. An in-person assessment is required.
How painful is an industrial piercing?
Pain varies. An industrial involves two cartilage piercings in one appointment, so clients often notice two brief pressure sensations followed by tenderness.
Why does bar alignment matter?
The two channels heal around one straight bar. If their angles do not match, the jewelry can place ongoing pressure on the tissue and contribute to irritation or migration.
Can I heal with two separate pieces of jewelry?
A traditional industrial is normally planned and healed around one bar so the channels remain aligned. Separate jewelry can allow the angles to shift. Follow your piercer’s recommendation.
Can the bar rest against the flat of my ear?
It should not create constant pressure on the flat cartilage. Your piercer checks clearance before piercing because anatomy that cannot provide it may need a different placement or jewelry concept.
When can I change the jewelry?
Do not change jewelry simply because the outside looks healed. Both cartilage channels must mature, and a professional should check alignment and fit before a change.
Do you accept walk-ins?
Walk-ins are first come, first served and depend on piercer availability. Call 630-458-8800 or use the booking page to reserve a time.
Continue Exploring
Build your ear-piercing plan.
Visit Rising Phoenix
Professional industrial piercing in Addison, Illinois.
Rising Phoenix Tattoo & Body Piercing has served Addison and Chicago’s western suburbs since 1998. Visit us at 19W326 Lake Street, Addison, IL 60101. We are open daily from noon to 10 PM.
Walk-ins are first come, first served. Book ahead when you prefer a guaranteed time for a detailed anatomy and alignment assessment.
AddisonElmhurstVilla ParkLombardGlendale HeightsBensenvilleWood DaleItascaBloomingdale
Two precise placements. One bold line.
Let’s plan your industrial piercing.
Bring your jewelry inspiration and let us evaluate alignment and clearance in person.